Procomm Plus Aspect Scripts
Just place the zipped .wax files under the Procomm/Aspect folder and run from the Script File dropbox while in the shell. Both the Modcell gui and the CFR gui are designed to run in the Craft Shell or the 101 page in the Control & Display pages. The Modcell gui basically encompasses all of the same functions as the CFR gui, but the CFR one is just a smaller footprint without all of the extra cellsite commands.
The pseudo-install-RMT gui lets you change the all of the T1 and GPS settings remotely on an already live modcell. This GUI can only be used on a modcell version 1&2 cabinet only with a CRC card, not a URC. There may not be much use for this if a field tech has the install version of RMT on his laptop. I created this gui for remote MSC use. Really, the only thing that a switch tech can change is the current T1 settings, provisioning CSU-B for possible daisychaining, and the GPS cable length. Once the changes are made, they do not take effect until an RCS restart is done at the EMS CLI, Stable Clear in the shell, or the CRC card is reseated. But hey, like I said, this may not be used all that much, but it's nice to know the ability is there to make these changes remotely.
Download the Lucent Modcell GUI - ver. 21.0 (updated 8/30/04
Aspect source code
This script is still somewhat a beta. I have found that I sometimes use the individual commands found in the other two gui's because it is easier to 'backtrack' if there is a problem. You can use this one at your own risk.
Download the 'Two-Click-CFR' Modcell GUI - ver. 21.0 (updated 8/30/04)
Aspect source code
Similar to the modcell gui but without all of the extra cellsite commands. Smaller footprint in the Procomm window.
Download the CFR tool - ver. 21.0 (updated 8/30/04)
Aspect source code
Download the Lucent Modcell Global Parameters tool - ver. 1.1 (updated 2/23/04)
Aspect source code
Version 1.1: I noticed that the RMT tool does not give a "Disable" option under the LIU settings for daisy chaining. I went ahead and removed this option to keep the gui more in-line with the RMT tool.
Version 1.0: Initial release. I removed any instances of European E1 settings for simplicity. It is recommended that you do not change the following fields unless you are POSITIVE of the outcome of doing so:
CSU Options = 255
GPS DC feed = 0
Line Type = 0
CSU-A & B timeslot mask = 0xffffffff
Instructions on use: You will need to telnet to the webserver running on the modcell. Follow the steps here up until you connect to port 888 on the modcell. Once you are connected to port 888, open this script from the Script File dropbox. Populate the fields you want to change and then click on the Update Global Parameters button. The script will send a properly formatted command using the input variables from the gui, thereby modifying the backplane settings. Remember, these settings will not take effect until an RCS restart command is issued from the EMS CLI, Stable Clear from the shell, or the CRC card is reseated. ***As you may already know, this is very similar to the procedure located here. The only difference between the two is that this method is used remotely and the other is done on-site. The on-site procedure is used to grow additional CDM's.*** The screenshot below is what you should see when connected to the modcell's webserver with the script/gui opened. After hitting the Update button, you will see a couple hundred lines of html data scroll by. This is normal. It also confirms that the settings took. If you know how to read the raw html, you will be able to confirm the settings visually.
All content copyrighted 2003-2005 Lansingwireless.com